Hydro-X Filter, University of Cambridge Array

Project Summary

A case study in providing our bespoke Hydro-X Filter solution to cleaning, renewing, and increasing the life-span of dated boiler systems in a prestigious university.

Download this case study

DOWNLOAD
9.0MB PDF

Introducion

Having reached the end of their life cycle the system boilers on the low pressure hot water (LPHW) system at a building on our customer’s University campus were planned for replacement.

As part of the new system assessment process, the water quality of the system was found to be unsatisfactory. Hydro-X was consequently engaged to consult on the best method to filter and cleanse the Low Pressure Hot Water system water.

After detailed testing, the system water was found to contain high levels of metal and sedimentary deposits, that if left untreated would seriously hamper the correct and efficient functioning of the new boilers to be installed.

Hydro-X’s recommendation was to develop a bespoke solution for our customer, centred on our Hydro-X Filter portable online filtering plant. The filtration method is used to achieve an economical and reliable treatment of the LPHW system by efficiently removing sediment, sludge and magnetic particles from the network.

About Hydro-X Filter

The Hydro-X Filter is a free standing, self-contained unit comprising of a filter housing, filter bag and suspended magnets that work to filter the system water, removing both soluble and insoluble metals together with debris over a period of time through a series of variable micron rated filters.

Using stabbings on the flow and return of the system, water passes through the unit via flexible hoses assisted by a circulation pump installed on the mobile unit platform.

This achieves the desired effect of continuously and progressively cleaning the system as water flows through.

Differential pressure can be measured across the filter bag to determine flow rates and optimise filtration rates. It also has the added incentive of determining when the filter bag requires changing.

Following successful installation into the system, the filtering process began with a 50 micron (um) filter being used. Each week the Hydro-X Filter unit needs to be visited and the filter bag inspected and changed depending on its condition.

Where filter condition was improved, a smaller 10 micron (um) filter can be installed to further filtrate and polish the system water.

The magnets were cleaned and a sample taken for water quality and clarity analysis.

Conclusion

As you will note from the illustrative process, four weeks after the project commencement and administration of the Hydro-X Filter solution there was a marked and very visible improvement in the water condition.

All levels of suspended particles and discolouration (as shown in the images provided) were greatly improved from the beginning of the process.

After six weeks the water was clean with only light discolouration of the filter bags.

The filtering process was allowed to continue given the 100m3 volume of the system being cleansed.

At week 10 the system was visibly clear, however, there was a noticeable decrease in the nitrite scale and corrosion inhibitor reserves. The system was consequently checked for the presence of water borne bacteria, these results highlighted Nitrite Reducing Bacteria and Pseudomonas colonisation of the system.

Our Hydrocid 306 full spectrum Biocide was introduced to the system and circulated with the filter left in place to strain out any dead biological cells and prevent the system reseeding itself.

This process once again discoloured the filter bags as they captured the biological matter separating from the system.

After two weeks the filter bags were noticeably clean again with only minimal discolouration.

Delivered outcomes and benefits to the customer

  • Maintain systems in accordance with BSRIA Guidance BG29/2012 and BG50/2013
  • The water now circulating within the LPHW system is within 5% quality incoming mains
  • The new boiler plant was able to be connected to a refreshed and revitalised system, extending their life cycle, and the life cycle of the associated distribution network
  • All outlets, radiators and other downstream assets will benefit from a cleaner system, meaning less pressure and energy required to circulate the system
  • Quantifiable costs savings will be made by improved efficiencies of a clean system
  • Potentially hazardous biological presence was identified, quickly and efficiently removed
  • Future corrosion of the system will be prevented by the use of scale and corrosion inhibitor chemical upon project completion
  • Avoids erosion on component, minimises deposit corrosion and galvanic corrosion

Talk to us today about your project requirements